Noise criteria, Noise Limit
Noise study has to be performed for environmental place and industrial plant with consideration of noise criteria (noise limit). INERTANCE has studies the related noise criteria such as work area noise, restricted noise area, absolute noise limit, indoor noise assessment (NC curve criteria) for speech and work interference, etc. The definition of noise criteria is generally required for following reasons;
- To reduce speech and work interference
- To ensure the warning signals are audible
- To conserve the hearing of workers
- To allow adequate speech, telephone, and radio communication
- To maintain working efficiency
- To provide the quite accommodation
- To prevent annoyance to the neighboring community
Plant noise – Work Area Noise
Sound pressure level including existing background noise in the work area within plant work area shall not exceed normally 85 ~ 90 dB(A) at any point 1 meter away from any equipment surface. This specific noise limit has to be followed from project requirements.
Plant noise – Restricted Noise Area
Restricted areas are those work areas in the plant where it is not reasonably practicable to reduce the noise level below the work area limit. Such a restricted area limit may be between 85 dB(A) and 115 dB(A). Permanent warning signs to indicate the mandatory use of ear protectors shall be installed at boundaries of restricted area.
Plant noise – Absolute Noise Limit
The sound pressure level shall not normally exceed 115 dB(A) at any time and at any location which is accessible to workers in any situation, including emergency such as the blowing of safety relief valves. This specific noise limit has to be followed from project requirements.
Speech and work interference (Indoor noise)
The desired noise criteria curves for various indoor areas shall be applied to minimize the speech and work interference. This criteria is normally defined by NC curve criteria.
Community and Residential Noise (Boundary Noise)
Community Noise standards shall be checked for adequate accommodation area from many kinds of noise sources. Residential noise limits are normally distinguished as Day, Evening, Night time zone respectively.
INERTANCE has a capability regarding noise and vibration engineering, and our experts are familiar with assessment of industrial noise. For further information, contact us at (email@example.com).
INERTANCE’s related services include;
- Environmental Noise
- Noise Control Design
- Noise Survey
- Pulsation Study for Reciprocating Compressor
- Pulsation Study for Reciprocating Pump
- Acoustic Induced Vibration
- HVAC Noise